Kyle Simpson | You dont know Javascript (Episode 27)

If you are new to programming or JS, be aware that these books are not intended as a gentle intro to Javascript.

 · 45 phút đọc.

If you are new to programming or JS, be aware that these books are not intended as a gentle intro to Javascript.

| NOTE: | | : – - | | Work in progress |

In Chapter 1 of the “Objects & Classes” book of this series, we confronted the common misconception that “everything in JS is an object”. We now circle back to that topic, and again dispel that myth.

Here, we’ll look at the core value types of JS, specifically the non-object types called primitives.

Value Types

JS doesn’t apply types to variables or properties – what I call, “container types” – but rather, values themselves have types – what I call, “value types”.

The language provides seven built-in, primitive (non-object) value types: [^PrimitiveValues]

undefined null boolean number bigint symbol string

These value-types define collections of one or more concrete values, each with a set of shared behaviors for all values of each type.

Type-Of

Any value’s value-type can be inspected via the typeof operator, which always returns a string value representing the underlying JS value-type:

typeof true;            // "boolean"

typeof 42;              // "number"

typeof 42n;             // "bigint"

typeof Symbol("42");    // "symbol"

The typeof operator, when used against a variable instead of a value, is reporting the value-type of the value in the variable:

greeting = "Hello";
typeof greeting;        // "string"

JS variables themselves don’t have types. They hold any arbitrary value, which itself has a value-type.

Non-objects?

What specifically makes the 7 primitive value types distinct from the object value types (and sub-types)? Why shouldn’t we just consider them all as essentially objects under the covers?

Consider:

myName = "Kyle";

myName.nickname = "getify";

console.log(myName.nickname);           // undefined

This snippet appears to silently fail to add a nickname property to a primitive string. Taken at face value, that might imply that primitives are really just objects under the covers, as many have (wrongly) asserted over the years.

| WARNING: | | : – - | | One might explain that silent failure as an example of auto-boxing (see “Automatic Objects” in Chapter 3), where the primitive is implicitly converted to a String instance wrapper object while attempting to assign the property, and then this internal object is thrown away after the statement completes. In fact, I said exactly that in the first edition of this book. But I was wrong; oops! |

Something deeper is at play, as we see in this version of the previous snippet:

"use strict";

myName = "Kyle";

myName.nickname = "getify";
// TypeError: Cannot create property 'nickname'
// on string 'Kyle'

Interesting! In strict-mode, JS enforces a restriction that disallows setting a new property on a primitive value, as if implicitly promoting it to a new object.

By contrast, in non-strict mode, JS allows the violation to go unmentioned. So why? Because strict-mode was added to the language in ES5.1 (2011), more than 15 years in, and such a change would have broken existing programs had it not been defined as sensitive to the new strict-mode declaration.

So what can we conclude about the distinction between primitives and objects? Primitives are values that are not allowed to have properties; only objects are allowed such.

| TIP: | | : – - | | This particular distinction seems to be contradicted by expressions like "hello".length; even in strict-mode, it returns the expected value 5. So it certainly seems like the string has a length property! But, as just previously mentioned, the correct explanation is auto-boxing; we’ll cover the topic in “Automatic Objects” in Chapter 3. |

Empty Values

The null and undefined types both typically represent an emptiness or absence of value.

Unfortunately, the null value-type has an unexpected typeof result. Instead of "null", we see:

typeof null;            // "object"

No, that doesn’t mean that null is somehow a special kind of object. It’s just a legacy of early days of JS, which cannot be changed because of how much code out in the wild it would break.

The undefined type is reported both for explicit undefined values and any place where a seemingly missing value is encountered:

typeof undefined;               // "undefined"

var whatever;

typeof whatever;                // "undefined"
typeof nonExistent;             // "undefined"

whatever = {};
typeof whatever.missingProp;    // "undefined"

whatever = [];
typeof whatever[10];            // "undefined"

| NOTE: | | : – - | | The typeof nonExistent expression is referring to an undeclared variable nonExistent. Normally, accessing an undeclared variable reference would cause an exception, but the typeof operator is afforded the special ability to safely access even non-existent identifiers and calmly return "undefined" instead of throwing an exception. |

However, each respective “empty” type has exactly one value, of the same name. So null is the only value in the null value-type, and undefined is the only value in the undefined value-type.

Null’ish

Semantically, null and undefined types both represent general emptiness, or absence of another affirmative, meaningful value.

| NOTE: | | : – - | | JS operations which behave the same whether null or undefined is encountered, are referred to as “null’ish” (or “nullish”). I guess “undefined’ish” would look/sound too weird! |

For a lot of JS, especially the code developers write, these two nullish values are interchangeable; the decision to intentionally use/assign null or undefined in any given scenario is situation dependent and left up to the developer.

JS provides a number of capabilities for helping treat the two nullish values as indistinguishable.

For example, the == (coercive-equality comparison) operator specifically treats null and undefined as coercively equal to each other, but to no other values in the language. As such, a … == null check is safe to perform if you want to check if a value is specifically either null or undefined:

if (greeting == null) {
// greeting is nullish/empty
}

Another (recent) addition to JS is the ? (nullish-coalescing) operator:

who = myName ? "User";

// equivalent to:
who = (myName != null) ? myName : "User";

As the ternary equivalent illustrates, ? checks to see if myName is non-nullish, and if so, returns its value. Otherwise, it returns the other operand (here, "User").

Along with ?, JS also added the ? (nullish conditional-chaining) operator:

record = {
shippingAddress: {
street: "123 JS Lane",
city: "Browserville",
state: "XY"
}
};

console.log( record?shippingAddress?street );
// 123 JS Lane

console.log( record?billingAddress?street );
// undefined

The ? operator checks the value immediately preceding (to the left) value, and if it’s nullish, the operator stops and returns an undefined value. Otherwise, it performs the . property access against that value and continues with the expression.

Just to be clear: record? is saying, “check record for nullish before . property access”. Additionally, billingAddress? is saying, “check billingAddress for nullish before . property access”.

| WARNING: | | : – - | | Some JS developers believe that the newer ? is superior to ., and should thus almost always be used instead of .. I believe that’s an unwise perspective. First of all, it’s adding extra visual clutter, which should only be done if you’re getting benefit from it. Secondly, you should be aware of, and planning for, the emptiness of some value, to justify using ?. If you always expect a non-nullish value to be present in some expression, using ? to access a property on it is not only unnecessary/wasteful, but also could potentially hide future bugs where your assumption of value-presence had failed but ? covered it up. As with most features in JS, use . where it’s most appropriate, and use ? where it’s most appropriate. Never substitute one when the other is more appropriate. |

There’s also a somewhat strange ?[ form of the operator, not ?[, for when you need to use [… ] style access instead of . access:

record?["shipping" + "Address"]?state;    // XY

Yet another variation, referred to as “optional-call”, is ?(, and is used when conditionally calling a function if the value is non-nullish:

// instead of:
//   if (someFunc) someFunc(42);
//
// or:
//   someFunc && someFunc(42);

someFunc?(42);

The ?( operator seems like it is checking to see if someFunc(…) is a valid function that can be called. But it’s not! It’s only checking to make sure the value is non-nullish before trying to invoke it. If it’s some other non-nullish but also non-function value type, the execution attempt will still fail with a TypeError exception.

| WARNING: | | : – - | | Because of that gotcha, I strongly dislike this operator form, and caution anyone against ever using it. I think it’s a poorly conceived feature that does more harm (to JS itself, and to programs) than good. There’s very few JS features I would go so far as to say, “never use it.” But this is one of the truly bad parts of the language, in my opinion. |

Distinct’ish

It’s important to keep in mind that null and undefined are actually distinct types, and thus null can be noticeably different from undefined. You can, carefully, construct programs that mostly treat them as indistinguishable. But that requires care and discipline by the developer. From JS’s perspective, they’re more often distinct.

There are cases where null and undefined will trigger different behavior by the language, which is important to keep in mind. We won’t cover all the cases exhaustively here, but here’s on example:

function greet(msg = "Hello") {
console.log(msg);
}

greet();            // Hello
greet(undefined);   // Hello
greet("Hi");        // Hi

greet(null);        // null

The =… clause on a parameter is referred to as the “parameter default”. It only kicks in and assigns its default value to the parameter if the argument in that position is missing, or is exactly the undefined value. If you pass null, that clause doesn’t trigger, and null is thus assigned to the parameter.

There’s no right or wrong way to use null or undefined in a program. So the takeaway is: be careful when choosing one value or the other. And if you’re using them interchangeably, be extra careful.

Boolean Values

The boolean type contains two values: false and true.

In the “old days”, programming languages would, by convention, use 0 to mean false and 1 to mean true. So you can think of the boolean type, and the keywords false and true, as a semantic convenience sugar on top of the 0 and 1 values:

// isLoggedIn = 1;
isLoggedIn = true;

isComplete = 0;
// isComplete = false;

Boolean values are how all decision making happens in a JS program:

if (isLoggedIn) {
// do something
}

while (!isComplete) {
// keep going
}

The ! operator negates/flips a boolean value to the other one: false becomes true, and true becomes false.

String Values

The string type contains any value which is a collection of one or more characters, delimited (surrounding on either side) by quote characters:

myName = "Kyle";

JS does not distinguish a single character as a different type as some languages do; "a" is a string just like "abc" is.

Strings can be delimited by double-quotes ("), single-quotes ('), or back-ticks (`). The ending delimiter must always match the starting delimiter.

Strings have an intrinsic length which corresponds to how many code-points – actually, code-units, more on that in a bit – they contain.

myName = "Kyle";

myName.length;      // 4

This does not necessarily correspond to the number of visible characters present between the start and end delimiters (aka, the string literal). It can sometimes be a little confusing to keep straight the difference between a string literal and the underlying string value, so pay close attention.

| NOTE: | | : – - | | We’ll cover length computation of strings in detail, in Chapter 2. |

JS Character Encodings

What type of character encoding does JS use for string characters?

You’ve probably heard of “Unicode” and perhaps even “UTF-8” (8-bit) or “UTF-16” (16-bit). If you’re like me (before doing the research it took to write this text), you might have just hand-waved and decided that’s all you need to know about character encodings in JS strings.

But… it’s not. Not even close.

It turns out, you need to understand how a variety of aspects of Unicode work, and even to consider concepts from UCS-2 (2-byte Universal Character Set), which is similar to UTF-16, but not quite the same. [^UTFUCS]

Unicode defines all the “characters” we can represent universally in computer programs, by assigning a specific number to each, called code-points. These numbers range from 0 all the way up to a maximum of 1114111 (10FFFF in hexadecimal).

The standard notation for Unicode characters is U+ followed by 4-6 hexadecimal characters. For example, the (heart symbol) is code-point 10084 (2764 in hexadecimal), and is thus notated with U+2764.

The first group of 65,535 code points in Unicode is called the BMP (Basic Multilingual Plane). These can all be represented with 16 bits (2 bytes). When representing Unicode characters from the BMP, it’s fairly straightforward, as they can fit neatly into single UTF-16 JS characters.

All the rest of the code points are grouped into 16 so called “supplemental planes” or “astral planes”. These code-points require more than 16 bits to represent – 21 bits to be exact – so when representing extended/supplemental characters above the BMP, JS actually stores these code-points as a pairing of two adjacent 16-bit code units, called surrogate halves (or surrogate pairs).

For example, the Unicode code point 127878 (hexadecimal 1F386) is 🎆 (fireworks symbol). JS stores this in a string value as two surrogate-halve code units: U+D83C and U+DF86. Keep in mind that these two parts of the whole character do not standalone; they’re only valid/meaningful when paired immediately adjacent to each other.

This has implications on the length of strings, because a single visible character like the 🎆 fireworks symbol, when in a JS string, is a counted as 2 characters for the purposes of the string length!

We’ll revisit Unicode characters in a bit, and then cover the challenges of computing string length in Chapter 2.

Escape Sequences

If " or ' are used to delimit a string literal, the contents are only parsed for character-escape sequences: \ followed by one or more characters that JS recognizes and parses with special meaning. Any other characters in a string that don’t parse as escape-sequences (single-character or multi-character), are inserted as-is into the string value.

For single-character escape sequences, the following characters are recognized after a \: b, f, n, r, t, v, 0, ', ", and \. For example, \n means new-line, \t means tab, etc.

If a \ is followed by any other character (except x and u – explained below), like for example \k, that sequence is interpreted as the \ being an unnecessary escape, which is thus dropped, leaving just the literal character itself (k).

To include a " in the middle of a "-delimited string literal, use the \" escape sequence. Similarly, if you’re including a ' character in the middle of a '-delimited string literal, use the \' escape sequence. By contrast, a ' does not need to be escaped inside a "-delimited string, nor vice versa.

mytitle = "Kyle Simpson (aka, \"getify\"), former O'Reilly author";

console.log(mytitle);
// Kyle Simpson (aka, "getify"), former O'Reilly author

In text, forward slash / is most common. But occasionally, you need a backward slash \. To include a literal \ backslash character without it performing as the start of a character-escape sequence, use the \\ (double backslashes).

So, then… what would \\\ (three backslashes) in a string parse as? The first two \’s would be a \\ escape sequence, thereby inserting just a single \ character in the string value, and the remaining \ would just escape whatever character comes immediately after it.

One place backslashes show up commonly is in Windows file paths, which use the \ separator instead of the / separator used in linux/unix style paths:

windowsFontsPath =
"C:\\Windows\\Fonts\\";

console.log(windowsFontsPath);
// C:\Windows\Fonts\"

| TIP: | | : – - | | What about four backslashes \\\\ in a string literal? Well, that’s just two \\ escape sequences next to each other, so it results in two adjacent backslashes (\\) in the underlying string value. You might recognize there’s an odd/even rule pattern at play. You should thus be able to deciper any odd (\\\\\, \\\\\\\\\, etc) or even (\\\\\\, \\\\\\\\\\, etc) number of backslashes in a string literal. |

Line Continuation

The \ character followed by an actual new-line character (not just literal n) is a special case, and it creates what’s called a line-continuation:

greeting = "Hello \
Friends!";

console.log(greeting);
// Hello Friends!

As you can see, the new-line at the end of the greeting = line is immediately preceded by a \, which allows this string literal to continue onto the subsequent line. Without the escaping \ before it, a new-line – the actual new-line, not the \n character escape sequence – appearing in a " or ' delimited string literal would actually produce a JS syntax parsing error.

Because the end-of-line \ turns the new-line character into a line continuation, the new-line character is omitted from the string, as shown by the console.log(…) output.

| NOTE: | | : – - | | This line-continuation feature is often referred to as “multi-line strings”, but I think that’s a confusing label. As you can see, the string value itself doesn’t have multiple lines, it only was defined across multiple lines via the line continuations. A multi-line string would actually have multiple lines in the underlying value. We’ll revisit this topic later in this chapter when we cover Template Literals. |

Multi-Character Escapes

Multi-character escape sequences may be hexadecimal or Unicode sequences.

Hexadecimal escape sequences are used to encode any of the base ASCII characters (codes 0-255), and look like \x followed by exactly two hexadecimal characters (0-9 and a-f / A-F – case insensitive). For example, A9 or a9 are decimal value 169, which corresponds to:

copyright = "\xA9";  // or "\xa9"

console.log(copyright);     // ©

For any normal character that can be typed on a keyboard, such as "a", it’s usually most readable to just specify the literal character, as opposed to a more obfuscated hexadecimal representation:

"a" === "\x61";             // true

Unicode In Strings

Unicode escape sequences alone can encode any of the characters from the Unicode BMP. They look like \u followed by exactly four hexadecimal characters.

For example, the escape-sequence \u00A9 (or \u00a9) corresponds to that same © symbol, while \u263A (or \u263a) corresponds to the Unicode character with code-point 9786: (smiley face symbol).

When any character-escape sequence (regardless of length) is recognized, the single character it represents is inserted into the string, rather than the original separate characters. So, in the string "\u263A", there’s only one (smiley) character, not six individual characters.

But as explained earlier, many Unicode code-points are well above 65535. For example, 1F4A9 (or 1f4a9) is decimal code-point 128169, which corresponds to the funny 💩 (pile-of-poo) symbol.

But \u1F4A9 wouldn’t work to include this character in a string, since it would be parsed as the Unicode escape sequence \u1F4A, followed by a literal 9 character. To address this limitation, a variation of Unicode escape sequences was introduced to allow an arbitrary number of hexadecimal characters after the \u, by surrounding them with {… } curly braces:

myReaction = "\u{1F4A9}";

console.log(myReaction);
// 💩

Recall the earlier discussion of extended (non-BMP) Unicode characters and surrogate halves? The same 💩 could also be defined with two explicit code-units, that form a surrogate pair:

myReaction = "\uD83D\uDCA9";

console.log(myReaction);
// 💩

All three representations of this same character are stored internally by JS identically, and are indistinguishable:

"💩" === "\u{1F4A9}";                // true
"\u{1F4A9}" === "\uD83D\uDCA9";     // true

Even though JS doesn’t care which way such a character is represented in your program, consider the readability differences carefully when authoring your code.

| NOTE: | | : – - | | Even though 💩 looks like a single character, its internal representation affects things like the length computation of a string with that character in it. We’ll cover length computation of strings in Chapter 2. |

Unicode Normalization

Another wrinkle in Unicode string handling is that even certain single BMP characters can be represented in different ways.

For example, the "é" character can either be represented as itself (code-point 233, aka \xe9 or \u00e9 or \u{e9}), or as the combination of two code-points: the "e" character (code-point 101, aka \x65, \u0065, \u{65}) and the combining tilde (code-point 769, aka \u0301, \u{301}).

Consider:

eTilde1 = "é";
eTilde2 = "\u00e9";
eTilde3 = "\u0065\u0301";

console.log(eTilde1);       // é
console.log(eTilde2);       // é
console.log(eTilde3);       // é

The string literal assigned to eTilde3 in this snippet stores the accent mark as a separate combining mark symbol. Like surrogate pairs, a combining mark only makes sense in connection with the symbol it’s adjacent to (usually after).

The rendering of the Unicode symbol should be the same regardless, but how the "é" character is internally stored affects things like length computation of the containing string, as well as equality and relational comparison (more on these in Chapter 2):

eTilde1.length;             // 2
eTilde2.length;             // 1
eTilde3.length;             // 2

eTilde1 === eTilde2;        // false
eTilde1 === eTilde3;        // true

One particular challenge is that you may copy-paste a string with an "é" character visible in it, and that character you copied may have been in the composed or decomposed form. But there’s no visual way to tell, and yet the underlying string value in the literal will be different:

"é" === "é";           // false!

This internal representation difference can be quite challenging if not carefully planned for. Fortunately, JS provides a normalize(…) utility method on strings to help:

eTilde1 = "é";
eTilde2 = "\u{e9}";
eTilde3 = "\u{65}\u{301}";

eTilde1.normalize("NFC") === eTilde2;
eTilde2.normalize("NFD") === eTilde3;

The "NFC" normalization mode combines adjacent code-points into the composed code-point (if possible), whereas the "NFD" normalization mode splits a single code-point into its decomposed code-points (if possible).

And there can actually be more than two individual decomposed code-points that make up a single composed code-point – for example, a single character could have several diacritical marks applied to it.

When dealing with Unicode strings that will be compared, sorted, or length analyzed, it’s very important to keep Unicode normalization in mind, and use it where necessary.

Unicode Grapheme Clusters

A final complication of Unicode string handling is the support for clustering of multiple adjacent code-points into a single visually distinct symbol, referred to as a grapheme (or a grapheme cluster).

An example would be a family emoji such as "👩‍👩‍👦‍👦", which is actually made up of 7 code-points that all cluster/group together into a single visual symbol.

Consider:

familyEmoji = "\u{1f469}\u{200d}\u{1f469}\u{200d}\u{1f466}\u{200d}\u{1f466}";

familyEmoji;            // 👩‍👩‍👦‍👦

This emoji is not a single registered Unicode code-point, and as such, there’s no normalization that can be performed to compose these 7 separate code-points into a single entity. The visual rendering logic for such composite symbols is quite complex, well beyond what most of JS developers want to embed into our programs. Libraries do exist for handling some of this logic, but they’re often large and still don’t necessarily cover all of the nuances/variations.

Unlike surrogate pairs and combining marks, the symbols in grapheme clusters can in fact act as standalone characters, but have the special combining behavior when placed adjacent to each other.

This kind of complexity significantly affects length computations, comparison, sorting, and many other common string-oriented operations.

Template Literals

I mentioned earlier that strings can alternately be delimited with `…` back-ticks:

myName = `Kyle`;

All the same rules for character encodings, character escape sequences, and lengths apply to these types of strings.

However, the contents of these template (string) literals are additionally parsed for a special delimiter sequence ${… }, which marks an expression to evaluate and interpolate into the string value at that location:

myName = `Kyle`;

greeting = `Hello, ${myName}!`;

console.log(greeting);      // Hello, Kyle!

Everything between the {… } in such a template literal is an arbitrary JS expression. It can be simple variables like myName, or complex JS programs, or anything in between (even another template literal expression!).

| TIP: | | : – - | | This feature is commonly called “template literals” or “template strings”, but I think that’s confusing. “Template” usually means, in programming contexts, a reusable set of text that can be re-evaluated with different data. For example, template engines for pages, email templates for newsletter campaigns, etc. This JS feature is not re-usable. It’s a literal, and it produces a single, immediate value (usually a string). You can put such a value in a function, and call the function multiple times. But then the function is acting as the template, not the the literal itself. I prefer instead to refer to this feature as interpolated literals, or the funny, short-hand: interpoliterals. I just think that name is more accurately descriptive. |

Template literals also have an interesting different behavior with respect to new-lines, compared to classic " or ' delimited strings. Recall that for those strings, a line-continuation required a \ at the end of each line, right before a new-line. Not so, with template literals!

myPoem = `
Roses are red
Violets are blue
C3PO's a funny robot
and so R2.`;

console.log(myPoem);
//
// Roses are red
// Violets are blue
// C3PO's a funny robot
// and so R2.

Line-continuations with template literals do not require escaping. However, that means the new-line is part of the string, even the first new-line above. In other words, myPoem above holds a truly multi-line string, as shown. However, if you \ escape the end of any line in a template literal, the new-line will be omitted, just like with non-template literal strings.

Template literals usually result in a string value, but not always. A form of template literal that may look kind of strange is called a tagged template literal:

price = formatCurrency`The cost is: ${totalCost}`;

Here, formatCurrency is a tag applied to the template literal value, which actually invokes formatCurrency(…) as a function, passing it the string literals and interpolated expressions parsed from the value. This function can then assemble those in any way it sees fit – such as formatting a number value as currency in the current locale – and return whatever value, string or otherwise, that it wants.

So tagged template literals are not always strings; they can be any value. But untagged template literals will always be strings.

Some JS developers believe that untagged template literal strings are best to use for all strings, even if not using any expression interpolation or multiple lines. I disagree. I think they should only be used when interpolating (or multi-line’ing).

| TIP: | | : – - | | The principle I always apply in making such determinations: use the closest-matched, and least capable, feature/tool, for any task. |

Moreover, there are a few places where `…` style strings are disallowed. For example, the "use strict" pragma cannot use back-ticks, or the pragma will be silently ignored (and thus the program accidentally runs in non-strict mode). Also, this style of strings cannot be used in quoted property names of object literals, destruturing patterns, or in the ES Module import… from… module-specifier clause.

My take: use `…` delimited strings where allowed, but only when interpolation/multi-line is needed; and keep using "…" or '…' delimited strings for everything else.

Number Values

The number type contains any numeric value (whole number or decimal), such as -42 or 3.1415926. These values are represented by the JS engine as 64-bit, IEEE-754 double-precision binary floating-point values. [^IEEE754]

JS numbers are always decimals; whole numbers (aka “integers”) are not stored in a different/special way. An “integer” stored as a number value merely has nothing non-zero as its fraction portion; 42 is thus indistinguishable in JS from 42.0 and 42.000000.

We can use Number.isInteger(…) to determine if a number value has any non-zero fraction or not:

Number.isInteger(42);           // true
Number.isInteger(42.0);         // true
Number.isInteger(42.000000);    // true

Number.isInteger(42.0000001);   // false

Parsing vs Coercion

If a string value holds numeric-looking contents, you may need to convert from that string value to a number, for mathematical operation purposes.

However, it’s very important to distinguish between parsing-conversion and coercive-conversion.

We can parse-convert with JS’s built-in parseInt(…) or parseFloat(…) utilities:

someNumericText = "123.456";

parseInt(someNumericText,10);               // 123
parseFloat(someNumericText);                // 123.456

parseInt("42",10) === parseFloat("42");     // true

parseInt("512px");                          // 512

| NOTE: | | : – - | | Parsing is only relevant for string values, as it’s a character-by-character (left-to-right) operation. It doesn’t make sense to parse the contents of a boolean, nor to parse the contents of a number or a null; there’s nothing to parse. If you pass anything other than a string value to parseInt(…) / parseFloat(…), those utilities first convert that value to a string and then try to parse it. That’s almost certainly problematic (leading to bugs) or wasteful – parseInt(42) is silly, and parseInt(42.3) is an abuse of parseInt(…) to do the job of Math.floor(…). |

Parsing pulls out numeric-looking characters from the string value, and puts them into a number value, stopping once it encounters a character that’s non-numeric (e.g., not -, . or 0-9). If parsing fails on the first character, both utilities return the special NaN value (see “Invalid Number” below), indicating the operation was invalid and failed.

When parseInt(…) encounters the . in "123.456", it stops, using just the 123 in the resulting number value. parseFloat(…) by contrast accepts this . character, and keeps right on parsing a float with any decimal digits after the ..

The parseInt(…) utility specifically, takes as an optional – but actually, rather necessary – second argument, radix: the numeric base to assume for interpreting the string characters for the number (range 2 - 36). 10 is for standard base-10 numbers, 2 is for binary, 8 is for octal, and 16 is for hexadecimal. Any other unusual radix, like 23, assumes digits in order, 0 - 9 followed by the a - z (case insensitive) character ordination. If the specified radix is outside the 2 - 36 range, parseInt(…) fails as invalid and returns the NaN value.

If radix is omitted, the behavior of parseInt(…) is rather nuanced and confusing, in that it attempts to make a best-guess for a radix, based on what it sees in the first character. This historically has lead to lots of subtle bugs, so never rely on the default auto-guessing; always specify an explicit radix (like 10 in the calls above).

parseFloat(…) always parses with a radix of 10, so no second argument is accepted.

| WARNING: | | : – - | | One surprising difference between parseInt(…) and parseFloat(…) is that parseInt(…) will not fully parse scientific notation (e.g., "1.23e+5"), instead stopping at the . as it’s not valid for integers; in fact, even "1e+5" stops at the "e". parseFloat(…) on the other hand fully parses scientific notation as expected. |

In contrast to parsing-conversion, coercive-conversion is an all-or-nothing sort of operation. Either the entire contents of the string are recognized as numeric (integer or floating-point), or the whole conversion fails (resulting in NaN – again, see “Invalid Number” later in this chapter).

Coercive-conversion can be done explicitly with the Number(…) function (no new keyword) or with the unary + operator in front of the value:

someNumericText = "123.456";

Number(someNumericText);        // 123.456
+someNumericText;               // 123.456

Number("512px");                // NaN
+"512px";                       // NaN

Other Numeric Representations

In addition to defining numbers using traditional base-10 numerals (0-9), JS supports defining whole-number-only number literals in three other bases: binary (base-2), octal (base-8), and hexadecimal (base-16).

// binary
myAge = 0b101010;
myAge;              // 42

// octal
myAge = 0o52;
myAge;              // 42

// hexadecimal
myAge = 0x2a;
myAge;              // 42

As you can see, the prefixes 0b (binary), 0o (octal), and 0x (hexadecimal) signal defining numbers in the different bases, but decimals are not allowed on these numeric literals.

| NOTE: | | : – - | | JS syntax allows 0B, 0O, and 0X prefixes as well. However, please don’t ever use those uppercase prefix forms. I think any sensible person would agree: 0O is much easier to confuse at a glance than 0o (which is, itself, a bit visually ambiguous at a glance). Always stick to the lowercase prefix forms! |

It’s important to realize that you’re not defining a different number, just using a different form to produce the same underlying numeric value.

By default, JS represents the underlying numeric value in output/string fashion with standard base-10 form. However, number values have a built-in toString(…) method that produces a string representation in any specified base/radix (as with parseInt(…), in the range 2 - 36):

myAge = 42;

myAge.toString(2);          // "101010"
myAge.toString(8);          // "52"
myAge.toString(16);         // "2a"
myAge.toString(23);         // "1j"
myAge.toString(36);         // "16"

You can round-trip any arbitrary-radix string representation back into a number using parseInt(…), with the appropriate radix:

myAge = 42;

parseInt(myAge.toString("23"),23);      // 42

Another allowed form for specifying number literals is using scientific notation:

myAge = 4.2E1;      // or 4.2e1 or 4.2e+1

myAge;              // 42

4.2E1 (or 4.2e1) means, 4.2 (10 1) (10 to the 1 power). The exponent can optionally have a sign + or -. If the sign is omitted, it’s assumed to be +. A negative exponent makes the number smaller (moves the decimal leftward) rather than larger (moving the decimal rightward):

4.2E-3;             // 0.0042

This scientific notation form is especially useful for readability when specifying larger powers of 10:

someBigPowerOf10 = 1000000000;

// vs:

someBigPowerOf10 = 1e9;

By default, JS will represent (e.g., as string values, etc) either very large or very small numbers – specifically, if the values require more than 21 digits of precision – using this same scientific notation:

ratherBigNumber = 123  11;
ratherBigNumber.toString();     // "9.748913698143826e+22"

prettySmallNumber = 123  -11;
prettySmallNumber.toString();   // "1.0257553107587752e-23"

Numbers with smaller absolute values (closer to 0) than these thresholds can still be forced into scientific notation form (as strings):

plainBoringNumber = 42;

plainBoringNumber.toExponential();      // "4.2e+1"
plainBoringNumber.toExponential(0);     // "4e+1"
plainBoringNumber.toExponential(4);     // "4.2000e+1"

The optional argument to toExponential(…) specifies the number of decimal digits to include in the string representation.

Another readability affordance for specifying numeric literals in code is the ability to insert _ as a digit separator wherever its convenient/meaningful to do so. For example:

someBigPowerOf10 = 1_000_000_000;

totalCostInPennies = 123_45;  // vs 12_345

The decision to use 12345 (no separator), 12_345 (like “12,345”), or 123_45 (like “123.45”) is entirely up to the author of the code; JS ignores the separators. But depending on the context, 123_45 could be more semantically meaningful (readability wise) than the more traditional three-digit-grouping-from-the-right-separated-with-commas style mimicked with 12_345.

IEEE-754 Bitwise Binary Representations

IEEE-754[^IEEE754] is a technical standard for binary representation of decimal numbers. It’s widely used by most computer programming languages, including JS, Python, Ruby, etc.

I’m not going to cover it exhaustively, but I think a brief primer on how numbers work in languages like JS is more than warranted, given how few programmers have any familiarity with it.

In 64-bit IEEE-754 – so called “double-precision”, because originally IEEE-754 used to be 32-bit, and now it’s double that! – the 64 bits are divided into three sections: 52 bits for the number’s base value (aka, “fraction”, “mantissa”, or “significand”), 11 bits for the exponent to raise 2 to before multiplying, and 1 bit for the sign of the ultimate value.

| NOTE: | | : – - | | Since only 52 of the 64 bits are actually used to represent the base value, number doesn’t actually have 2^64 values in it. According to the specification for the number type[^NumberType], the number of values is precisely 2^64 - 2^53 + 3, or about 18 quintillion, split about evenly between positive and negative numbers. |

These bits are arranged left-to-right, as so (S = Sign Bit, E = Exponent Bit, M = Mantissa Bit):

SEEEEEEEEEEEMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM

So, the number 42 (or 42.000000) would be represented by these bits:

// 42:
01000000010001010000000000000000
00000000000000000000000000000000

The sign bit is 0, meaning the number is positive (1 means negative).

The 11-bit exponent is binary 10000000100, which in base-10 is 1028. But in IEEE-754, this value is interpreted as being stored unsigned with an “exponent bias” of 1023, meaning that we’re shifting up the exponent range from -1022:1023 to 1:2046 (where 0 and 2047 are reserved for special representations). So, take 1028 and subtract the bias 1023, which gives an effective exponent of 5. We raise 2 to that value (2^5), giving 32.

| NOTE: | | : – - | | If the subtracting 1023 from the exponent value gives a negative (e.g., -3), that’s still interpreted as 2’s exponent; raising 2 to negative numbers just produces smaller and smaller values. |

The remaining 52 bits give us the base value 01010000…, interpreted as binary decimal 1.0101000… (with all trailing zeros). Converting that to base-10, we get 1.3125000…. Finally, then multiply that by 32 already computed from the exponent. The result: 42.

As you might be able to tell now, this IEEE-754 number representation standard is called “floating point” because the decimal point “floats” back-and-forth along the bits, depending on the specified exponent value.

The number 42.0000001, which is only different from 42.000000 by just 0.0000001, would be represented by these bits:

// 42.0000001:
01000000010001010000000000000000
00000000110101101011111110010101

Notice how the previous bit pattern and this one differ by quite a few bits in the trailing positions! The binary decimal fraction containing all those extra 1 bits (1.010100000000…01011111110010101) converts to base-10 as 1.31250000312500003652, which multiplied by 32 gives us exactly 42.0000001.

We’ll revisit more details about floating-point (im)precision in Chapter 2. But now you understand a bit more about how IEEE-754 works!

Number Limits

As might be evident now that you’ve seen how IEEE-754 works, the 52 bits of the number’s base must be shared, representing both the whole number portion (if any) as well as the decimal portion (if any), of the intended number value. Essentially, the larger the whole number portion to be represented, the less bits are available for the decimal portion, and vice versa.

The largest value that can accurately be stored in the number type is exposed as Number.MAX_VALUE:

Number.MAX_VALUE;           // 1.7976931348623157e+308

You might expect that value to be a decimal value, given the representation. But on closer inspection, 1.79E308 is (approximately) 2^1024 - 1. That seems much more like it should be an integer, right? We can verify:

Number.isInteger(Number.MAX_VALUE);         // true

But what happens if you go above the max value?

Number.MAX_VALUE === (Number.MAX_VALUE + 1);
// true – oops!

Number.MAX_VALUE === (Number.MAX_VALUE + 10000000);
// true

So, is Number.MAX_VALUE actually the largest value representable in JS? It’s certainly the largest finite number value.

IEEE-754 defines a special infinite value, which JS exposes as Infinity; there’s also a -Infinity at the far other end of the number line. Values can be tested to see if they are finite or infinite:

Number.isFinite(Number.MAX_VALUE);  // true

Number.isFinite(Infinity);          // false
Number.isFinite(-Infinity);         // false

You can’t ever count upwards (with + 1) from Number.MAX_VALUE to Infinity, no matter how long you let the program run, because the + 1 operation isn’t actually incrementing beyond the top Number.MAX_VALUE value.

However, JS arithmetic operations (+, “, and even /) can definitely overflow the number type on the top-end, in which case Infinity is the result:

Number.MAX_VALUE + 1E291;           // 1.7976931348623157e+308
Number.MAX_VALUE + 1E292;           // Infinity

Number.MAX_VALUE  1.0000000001;    // Infinity

1 / 1E-308;                         // 1e+308
1 / 1E-309;                         // Infinity

| TIP: | | : – - | | The reverse is not true: an arithmetic operation on an infinite value will never produce a finite value. |

Going from the very large to the very, very small – actually, closest to zero, which is not the same thing as going very, very negative! – the smallest absolute decimal value you could theoretically store in the number type would be 2^-1022 (remember the IEEE-754 exponent range?), or around 2E-308. However, JS engines are allowed by the specification to vary in their internal representations for this lower limit. Whatever the engine’s effective lower limit is, it’ll be exposed as Number.MIN_VALUE:

Number.MIN_VALUE;               // 5e-324 < – usually!

Most JS engines seem to have a minimum representable value around 5E-324 (about 2^-1074). Depending on the engine and/or platform, a different value may be exposed. Be careful about any program logic that relies on such implementation-dependent values.

Safe Integer Limits

Since Number.MAX_VALUE is an integer, you might assume that it’s the largest integer in the language. But that’s not really accurate.

The largest integer you can accurately store in the number type is 2^53 - 1, or 9007199254740991, which is way smaller than Number.MAX_VALUE (about 2^1024 - 1). This special safer value is exposed as Number.MAX_SAFE_INTEGER:

maxInt = Number.MAX_SAFE_INTEGER;

maxInt;             // 9007199254740991

maxInt + 1;         // 9007199254740992

maxInt + 2;         // 9007199254740992

We’ve seen that integers larger than 9007199254740991 can show up. However, those larger integers are not “safe”, in that the precision/accuracy start to break down when you do operations with them. As shown above, the maxInt + 1 and maxInt + 2 expressions both errantly give the same result, illustrating the hazard when exceeding the Number.MAX_SAFE_INTEGER limit.

But what’s the smallest safe integer?

Depending on how you interpret “smallest”, you could either answer 0 or… Number.MIN_SAFE_INTEGER:

Number.MIN_SAFE_INTEGER;    // -9007199254740991

And JS provides a utility to determine if a value is an integer in this safe range (-2^53 + 1 - 2^53 - 1):

Number.isSafeInteger(2  53);      // false
Number.isSafeInteger(2  53   - 1);  // true

Double Zeros

It may surprise you to learn that JS has two zeros: 0, and -0 (negative zero). But what on earth is a “negative zero”? [^SignedZero] A mathematician would surely balk at such a notion.

This isn’t just a funny JS quirk; it’s mandated by the IEEE-754[^IEEE754] specification. All floating point numbers are signed, including zero. And though JS does kind of hide the existence of -0, it’s entirely possible to produce it and to detect it:

function isNegZero(v) {
return v == 0 && (1 / v) == -Infinity;
}

regZero = 0 / 1;
negZero = 0 / -1;

regZero === negZero;        // true – oops!
Object.is(-0,regZero);      // false – phew!
Object.is(-0,negZero);      // true

isNegZero(regZero);         // false
isNegZero(negZero);         // true

You may wonder why we’d ever need such a thing as -0. It can be useful when using numbers to represent both the magnitude of movement (speed) of some item (like a game character or an animation) and also its direction (e.g., negative = left, positive = right).

Without having a signed zero value, you couldn’t tell which direction such an item was pointing at the moment it came to rest.

| NOTE: | | : – - | | While JS defines a signed zero in the number type, there is no corresponding signed zero in the bigint number type. As such, -0n is just interpreted as 0n, and the two are indistinguishable. |

Invalid Number

Mathematical operations can sometimes produce an invalid result. For example:

42 / "Kyle";            // NaN

It’s probably obvious, but if you try to divide a number by a string, that’s an invalid mathematical operation.

Another type of invalid numeric operation is trying to coercively-convert a non-numeric resembling value to a number. As discussed earlier, we can do so with either the Number(…) function or the unary + operator:

myAge = Number("just a number");

myAge;                  // NaN

+undefined;             // NaN

All such invalid operations (mathematical or coercive/numeric) produce the special number value called NaN.

The historical root of “NaN” (from the IEEE-754[^IEEE754] specification) is as an acronym for “Not a Number”. Technically, there are about 9 quadrillion values in the 64-bit IEEE-754 number space designated as “NaN”, but JS treats all of them indistinguishably as the single NaN value.

Unfortunately, that not a number meaning produces confusion, since NaN is absolutely a number.

| TIP: | | : – - | | Why is NaN a number? Think of the opposite: what if a mathematical/numeric operation, like + or /, produced a non-number value (like null, undefined, etc)? Wouldn’t that be really strange and unexpected? What if they threw exceptions, so that you had to try…catch all your math? The only sensible behavior is, numeric/mathematical operations should always produce a number, even if that value is invalid because it came from an invalid operation. |

To avoid such confusion, I strongly prefer to define “NaN” as any of the following instead:

“iNvalid Number” “Not actual Number” “Not available Number” “Not applicable Number”

NaN is a special value in JS, in that it’s the only value in the language that lacks the identity property – it’s never equal to itself.

NaN === NaN;            // false

So unfortunately, the === operator cannot check a value to see if it’s NaN. But there are some ways to do so:

politicianIQ = "nothing" / Infinity;

Number.isNaN(politicianIQ);         // true

Object.is(NaN,politicianIQ);        // true
[ NaN ].includes(politicianIQ);     // true

Here’s a fact of virtually all JS programs, whether you realize it or not: NaN happens. Seriously, almost all programs that do any math or numeric conversions are subject to NaN showing up.

If you’re not properly checking for NaN in your programs where you do math or numeric conversions, I can say with some degree of certainty: you probably have a number bug in your program somewhere, and it just hasn’t bitten you yet (that you know of!).

| WARNING: | | : – - | | JS originally provided a global function called isNaN(…) for NaN checking, but it unfortunately has a long-standing coercion bug. isNaN("Kyle") returns true, even though the string value "Kyle" is most definitely not the NaN value. This is because the global isNaN(…) function forces any non-number argument to coerce to a number first, before checking for NaN. Coercing "Kyle" to a number produces NaN, so now the function sees a NaN and returns true! This buggy global isNaN(…) still exists in JS, but should never be used. When NaN checking, always use Number.isNaN(…), Object.is(…), etc. |

BigInteger Values

As the maximum safe integer in JS numbers is 9007199254740991 (see above), such a relatively low limit can present a problem if a JS program needs to perform larger integer math, or even just hold values like 64-bit integer IDs (e.g., Twitter Tweet IDs).

For that reason, JS provides the alternate bigint type (BigInteger), which can store arbitrarily large (theoretically not limited, except by finite machine memory and/or JS implementation) integers.

To distinguish a bigint from a whole (integer) number value, which would otherwise both look the same (42), JS requires an n suffix on bigint values:

myAge = 42n;        // this is a bigint, not a number

myKidsAge = 11;     // this is a number, not a bigint

Let’s illustrate the upper un-boundedness of bigint:

Number.MAX_SAFE_INTEGER;        // 9007199254740991

Number.MAX_SAFE_INTEGER + 2;    // 9007199254740992 – oops!

myBigInt = 9007199254740991n;

myBigInt + 2n;                  // 9007199254740993n – phew!

myBigInt  2n;                 // 81129638414606663681390495662081n

As you can see, the bigint value-type is able to do precise arithmetic above the integer limit of the number value-type.

| WARNING: | | : – - | | Notice that the + operator required … + 2n instead of just … + 2? You cannot mix number and bigint value-types in the same expression. This restriction is annoying, but it protects your program from invalid mathematical operations that would give non-obvious unexpected results. |

A bigint value can also be created with the BigInt(…) function; for example, to convert a whole (integer) number value to a bigint:

myAge = 42n;

inc = 1;

myAge += BigInt(inc);

myAge;              // 43n

| WARNING: | | : – - | | Though it may seem counter-intuitive to some readers, BigInt(…) is always called without the new keyword. If new is used, an exception will be thrown. |

That’s definitely one of the most common usages of the BigInt(…) function: to convert numbers to bigints, for mathematical operation purposes.

But it’s not that uncommon to represent large integer values as strings, especially if those values are coming to the JS environment from other language environments, or via certain exchange formats, which themselves do not support bigint-style values.

As such, BigInt(…) is useful to coerce those string values to bigints:

myBigInt = BigInt("12345678901234567890");

myBigInt;                       // 12345678901234567890n

Unlike parseInt(…), if any character in the string is non-numeric (0-9 digits or -), including . or even a trailing n suffix character, an exception will be thrown. In other words, BigInt(…) is an all-or-nothing coercion-conversion, not a parsing-conversion.

| NOTE: | | : – - | | I think it’s absurd that BigInt(…) won’t accept the trailing n character while string coercing (and thus effectively ignore it). I lobbied vehemently for that behavior, in the TC39 process, but was ultimately denied. In my opinion, it’s now a tiny little gotcha wart on JS, but a wart nonetheless. |

Symbol Values

The symbol type contains special opaque values called “symbols”. These values can only be created by the Symbol(…) function:

secret = Symbol("my secret");

| WARNING: | | : – - | | Just as with BigInt(…), the Symbol(…) function must be called without the new keyword. |

The "my secret" string passed into the Symbol(…) function call is not the symbol value itself, even though it seems that way. It’s merely an optional descriptive label, used only for debugging purposes for the benefit of the developer.

The underlying value returned from Symbol(…) is a special kind of value that resists the program/developer inspecting anything about its underlying representation. That’s what I mean by “opaque”.

| NOTE: | | : – - | | You could think of symbols as if they are monotonically incrementing integer numbers – indeed, that’s similar to how at least some JS engines implement them. But the JS engine will never expose any representation of a symbol’s underlying value in any way that you or the program can see. |

Symbols are guaranteed by the JS engine to be unique (only within the program itself), and are unguessable. In other words, a duplicate symbol value can never be created in a program.

You might be wondering at this point what symbols are used for?

One typical usage is as “special” values that the developer distinguishes from any other values that could accidentally collide. For example:

EMPTY = Symbol("not set yet");
myNickname = EMPTY;

// later:

if (myNickname == EMPTY) {
//… 
}

Here, I’ve defined a special EMPTY value and initialized myNickname to it. Later, I check to see if it’s still that special value, and then perform some action if so. I might not want to have used null or undefined for such purposes, as another developer might be able to pass in one of those common built-in values. EMPTY by contrast here is a unique, unguessable value that only I’ve defined and have control over and access to.

Perhaps even more commonly, symbols are often used as special (meta-) properties on objects:

myInfo = {
name: "Kyle Simpson",
nickname: "getify",
age: 42
};

// later:
PRIVATE_ID = Symbol("private unique ID, don't touch!");

myInfo[PRIVATE_ID] = generateID();

It’s important to note that symbol properties are still publicly visible on any object; they’re not actually private. But they’re treated as special and set-apart from the normal collection of object properties. It’s similar to if I had done instead:

Object.defineProperty(myInfo,"_private_id_dont_touch",{
value: generateID(),
enumerable: false,
});

By convention only, most developers know that if a property name is prefixed with _ (or even more so, _!), that means it’s “pseudo-private” and to leave it alone unless they’re really supposed to access it.

Symbols basically serve the same use-case, but a bit more ergonomically than the prefixing approach.

Well-Known Symbols (WKS)

JS pre-defines a set of symbols, referred to as well-known symbols (WKS), that represent certain special meta-programming hooks on objects. These symbols are stored as static properties on the Symbol function object. For example:

myInfo = {
//… 
};

String(myInfo);         // [object Object]

myInfo[Symbol.toStringTag] = "my-info";
String(myInfo);         // [object my-info]

Symbol.toStringTag is a well-known symbol for accessing and overriding the default string representation of a plain object ("[object Object]"), replacing the "Object" part with a different value (e.g., "my-info").

See the “Objects & Classes” book of this series for more information about Well-Known Symbols and metaprogramming.

Global Symbol Registry

Often, you want to keep symbol values private, such as inside a module scope. But occasionally, you want to expose them so they’re accessible globally throughout all the files in a JS program.

Instead of just attaching them as global variables (i.e., properties on the globalThis object), JS provides an alternate global namespace to register symbols in:

// retrieve if already registered,
// otherwise register
PRIVATE_ID = Symbol.for("private-id");

// elsewhere:

privateIDKey = Symbol.keyFor(PRIVATE_ID);
privateIDKey;           // "private-id"

// elsewhere:

// retrieve symbol from registry undeer
// specified key
privateIDSymbol = Symbol.for(privateIDKey);

The value passed to Symbol.for(…) is not the same as passed to Symbol(…). Symbol.for(…) expects a unique key for the symbol to be registered under in the global registry, whereas Symbol(…) optionally accepts a descriptive label (not necessarily unique).

If the registry doesn’t have a symbol under that specified key, a new symbol (with no descriptive label) is created and automatically registered there. Otherwise, Symbol.for(…) returns whatever previously registered symbol is under that key.

Going in the opposite direction, if you have the symbol value itself, and want to retrieve the key it’s registered under, Symbol.keyFor(…) takes the symbol itself as input, and returns the key (if any). That’s useful in case it’s more convenient to pass around the key string value than the symbol itself.

Object or Primitive?

Unlike other primitives like 42, where you can create multiple copies of the same value, symbols do act more like specific object references in that they’re always completely unique (for purposes of value assignment and equality comparison). The specification also categorizes the Symbol() function under the “Fundamental Objects” section, calling the function a “constructor”, and even defining its prototype property.

However, as mentioned earlier, new cannot be used with Symbol(…); this is similar to the BigInt() “constructor”. We clearly know bigint values are primitives, so symbol values seem to be of the same kind.

And in the specification’s “Terms and Definitions”, it lists symbol as a primitive value. [^PrimitiveValues] Moreover, the values themselves are used in JS programs as primitives rather than objects. For example, symbols are primarily used as keys in objects – we know objects cannot use other object values as keys! – along with strings, which are also primitives.

As mentioned earlier, some JS engines even internally implement symbols as unique, monotonically incrementing integers (primitives!).

Finally, as explained at the top of this chapter, we know primitive values are not allowed to have properties set on them, but are auto-boxed (see “Automatic Objects” in Chapter 3) internally to the corresponding object-wrapper type to facilitate property/method access. Symbols follow all these exact behaviors, the same as all the other primitives.

All this considered, I think symbols are much more like primitives than objects, so that’s how I present them in this book.

Primitives Are Built-In Types

We’ve now dug deeply into the seven primitive (non-object) value types that JS provides automatically built-in.

Before we move on to discussing JS’s built-in object value type, we want to take a closer look at the kinds of behaviors we can expect from JS values. We’ll do so in-depth, in the next chapter.

Share:
Quay lại.

Có thể bạn chưa đọc

Xem tất cả »

Đăng ký nhận bảng tin hàng tuần

Liên lạc trao đổi

Liên lạc thông qua Instagram

Thông qua Instagram, bạn có thể trao đổi trực tiếp và tức thời, cũng như cập nhật những thông tin mới nhất từ nhavantuonglai.

Tức thời

Bạn có thể gửi và nhận tin nhắn nhanh chóng, trực tiếp, giúp những vấn đề cá nhân của bạn được giải quyết tức thời và hiệu quả hơn.

Thân thiện

Vì tính chất là kênh liên lạc nhanh, nên bạn có thể bỏ qua những nghi thức giao tiếp thông thường, chỉ cần lịch sự và tôn trọng thì sẽ nhận được sự phản hồi đầy thân thiện, thoải mái từ tác giả.

Trao đổi trên email

Thông qua email cá nhân, bạn có thể trao đổi thỏa thuận hợp tác, kết nối chuyên sâu và mang tính chuyên nghiệp.

Tin cậy

Trong một số trường hợp, email được dùng như một tài liệu pháp lý, chính vì vậy mà bạn có thể an tâm và tin cậy khi trao đổi với tác giả thông qua email.

Chuyên nghiệp

Cấu trúc của email đặt tính chuyên nghiệp lên hàng đầu, nên những thông tin, nội dung được viết trong email từ tác giả sẽ luôn đảm bảo điều này ở mức cao nhất.